P a g e |
24
4.3 Tripod bracket
Carlson supplies a bracket to allow the VS+ to be connected to standard survey tripods.
This bracket also allows the VS+ to connect to legacy aluminum booms previously supplied with the Void Scanner.
Screw the spigot into the 5/8” thread on the base of the VS+. Screw the M6 screw, held captive in the bracket, into
the M6 thread on the underside of the VS+.
Figure 28 VS+ connected to legacy carbon fibre boom
Spigot
M6 screw
5/8” thread
Figure 29 Tripod bracket (top) attached to VS+ (bottom)
