SD2DUG software manual
9
Program analink channel
To program one or more channels as analink, follow this procedure:
Step
Action
1
Click on the
channel
to be programmed
(from A1 to P8): if one or more channels
are selected, the underline is marked with a thicker line
Not selected channel
Selected channel
To select more channels, click and drag them
2
Click on the orange circle on the right side of
Analink
: the
channels will be
marked in
orange
Program 8-bit binary protocol
To program as 8-bit binary protocol, follow this procedure:
Step
Action
1
Click on
one
of the channels belonging to the group to be programmed:
2
Click on the brown circle on the right side of
8-bit
: all the 8 bits belonging to the
group will be marked in brown
