SD2DUG software manual
23
Set the communication parameters
To set the communication parameters, follow this procedure:
Step
Action
2
Click on
3
Select the proper setting in
Modbus
:
Click on
Save
Things to know
These settings are applied only to the RS485 port.
The parameters are fixed and cannot be changed on the USB port
Output status
To set the output status after writing a configuration, follow this procedure:
Step
Action
2
Click on
3
To reset the Modbus data after writing a configuration, enable
Reset
Modbus
data after configuration phase
To keep the output status after writing a new configuration, enable
Keep output
status after configuration phase
