SD2DUG software manual
18
Set an output when bus is faulty
To program an output channel so that it is set when the bus is faulty, follow this procedure:
Step
Action
1
To enable this function, click on the icon
Check
Clear ouput....
Set after how many seconds the output has to be reset
Click on
Save
2
Click on the
output
channel
to be programmed
(from A1 to P8): if one or more
channels are selected, the underline is marked with a thicker line
Not selected channel
Selected channel
To select more channels, click and drag them
3
Click on the red circle on the right side of
Bus faulty
– set output
: the
channels
will be marked with a small circle next to the channel name
The status of the selected channel will be activated each time the bus is faulty
Split I/O
To program an input channel as split I/O, follow this procedure:
Step
Action
1
Click on the
input
channel
to be programmed
(from A1 to P8): if one or more
channels are selected, the underline is marked with a thicker line
Not selected channel
Selected channel
To select more channels, click and drag them
