SD2DUG software manual
19
2
Click on the red arrows on the right side of
Split I/O
: the
channels will be marked
with the same symbol below the channel name
Double scan
To enable the double scan on one or more input channels, follow this procedure:
Step
Action
1
Click on the
input
channel
to be programmed
(from A1 to P8): if one or more
channels are selected, the underline is marked with a thicker line
Not selected channel
Selected channel
To select more channels, click and drag them
2
Click on the red double bar on the right side of
Double scan
: the
channels will
be marked with the same symbol next to the channel name
Connect the PC to the SD2DUG24
To connect to the SD2DUG24 generator, follow this procedure:
Step
Action
1
Connect the SD2DUG24 to your PC, using one of the following ports:
a) The Micro-USB port in the front part of the module
– using a standard
USB cable
b) The RS485 port on the bottom of the module
– using an RS485 to USB
converter
