SD2DUG software manual
17
Multiplexer settings for EM24 protocol
To set the multiplexer parameters, follow this procedure:
Step
Action
1
Click on
2
To set how long the value of the multiplexer has to be maintained for, fill in the
field
Keep multiplexer
value for ...
3
The multiplexer values have to be defined in the
Multiplexer values
field:
To add a new value, click on
To switch beween single value or more values, click on
To delete an existing value, click on
Clear output when bus is faulty
To program the output channels so that they are reset when the bus is faulty, follow this
procedure:
Step
Action
1
To enable this function, click on the icon
Check
Clear ouput....
Set after how many seconds the output has to be reset
Click on
Save
The action will automatically be applied to all the output channels
