6
Carlo Gavazzi LTD
RSWT
RSWT DS ENG
17/05/2018
Structure
Element Component
Function
A
Ramp-up time selector
Sets the desired motor starting time.
B
Ramp-down time selector Sets the desired motor stopping time.
C
FLC knob selector
Sets the motor full load current (FLC). The FLC is setting is used by the RSWT
for the overload protection and for the maximum current allowed during motor
start.
D
Test/Reset
Simulate overload alarm (press for 1 sec when RSWT is in Idle state)
Set alarm recovery mode (press for 5 sec when RSWT is in Idle state)
Reset alarms (press for <1sec when RSWT is in alarm mode and alarm mode
is Manual)
E1
LED indicators
Supply. Indicates that the RSWT supply is ON.
E2
LED indicators
Manual. Indicates the alarm reset mode.
Manual reset mode - LED ON, Auto reset mode - LED OFF
(Factory default setting: Auto, LED OFF)
E3
LED indicators
Alarm. Indicates that the RSWT is in alarm. The number of flashes indicates
the alarm type.
E4
LED indicators
Ramping/bypass. Indicates whether RSWT is in ramping (flashing) or bypass
(fully ON).
RSWT 45mm
RSWT 75mm
RSWT 120mm
A
B
C
D
E1
E2
E3
E4
A
B
C
D
E1
E2
E3
E4
A
B
C
D
E1
E2
E3
E4
