ENGLISH
17
The flowchart shows
how you get access
to the different modes
of operation.
4.2.1 Measurement and Control
In the measuring and control operating mode the instrument has the
following basic functions:
-
Measurement of the input variable
-
Display of the measured variable in the correct engineering unit
-
Setpoint control with activation/deactivation of the alarm LED’s and
relays
-
Detects when the input is out of range and indicating this with ±EE
in the display. The relay status will be as the preprogrammed fault
condition
-
‘Hold’ input detection
-
Update of peak and valley function
-
If analogue output module is present, repetition of the displayed
value in analogue form
The , and control the display. The normal function of
the display is to indicate the measured input variable.
The following lines describe how you can use these for selecting infor-
mation on the display during daily operation.
▲
S
▼
Power on
Calibration
mode
Measurement
and control
(normal mode)
Programming
mode
S and
▼
activated?
S and
▲
activated?
Y
Y
N
N
∆
∆
∆
Summary of Contents for EDM 35 -
Page 19: ...ENGLISH 19 Scaling Operation Setpoint Operation ...
Page 47: ...ENGLISH 47 Notes ...
Page 48: ...ENGLISH Notes ...
