STERIL INTRAPLANT
GB - 8
Carlo de Giorgi
4.4 - SAFETY WARNINGS
- The appliance must be used exclusively by qualified personnel who
are aware of the potential hazards.
- Do not use the appliance in the vicinity of inflammable materials or
gases.
- Do not open or disassemble the appliance.
- Wear suitable work clothing and observe the safety regulations in
force in the workplace.
- Pay attention to the use of inflammable liquids or gases such as
disinfectants, anaesthetics, solvents, etc.; the appliance is not
designed for use in atmosphere subject to explosion hazards so
ensure that any such substances have been completely eliminated or
evaporated and dispersed before activating the appliance (ensure
there are no residual substances in the area).
-
For the above reasons, also pay attention to the presence of
endogenous gases and materials impregnated with oxygen (e.g.
cotton wadding, gauzes, etc.).
- Periodically check the condition of cable insulations.
5 - OPERATOR INSTRUCTIONS
5.1 - CONTROLS
The appliance is equipped with the following control devices on the front
panel (Fig. 6):
- water pump ON/OFF button with orange indicator LED;
- “reverse” button (2) with orange indicator LED; if the selected function
requires "normal" rotation direction, this LED must be off;
- the two controls described above are also present on the footswitch
(fig. 7): the left-hand button (3) switches the pump ON and OFF and
the right-hand button (4) serves to change the direction of tool rotation;
- “UP +” (5) and "DOWN -” (6) buttons to modify the values in the selected
field on display (8);
- “shift” (7) button to select the edit field on display (8);
- display (8) presents the editable parameters on two text lines; the
required parameter must first be selected using the “shift” button (the
cursor flashes on the selected value) and can then be modified using
the “-” and “+” buttons.
