OPERATION
EN
SI-21-06-R1 (11/2021)
23 / 32
www.carlisleft.com
Step 22
Step 21
Lightly lubricate bearing housing
Use Ransburg lubricant A11545 sparingly
enough (super thin film) to allow bearings to
slide into position. Too much lubricant could
lead to air bearing failure.
Figure 1-21A
Figure 1-21B
Slide Bearings into Position within
the Housing
Slide Bearings into Housing:
Notice position of the taper on bearings, they
will be facing inwards during assembly.
Set Screw Hole Alignment:
Make sure to align both blind set screw
holes to bearing housing during the
insertion process.
Figure 1-22A
Figure 1-22B