OPERATION
EN
SI-21-06-R1 (11/2021)
19 / 32
www.carlisleft.com
Step 16
(Cont.)
ing the rear thrust bearing final inspection with
the .004 inch (0.102mm) wire will be required to
assure jets are open and clean.
Figure 1-16
Figure 1-16A: Optional
Optional Tool A13270-00
Thrust plate sanding tool can be purchased and
used to polish the thrust plate on both sides of
the shaft using the 2/0 abrasive sanding paper/
cloth disc as shown in Figure 1-16A.