Function Menu
Dynacode IP Series
62
Operating Manual
08.16
Press key
to arrive the next menu item.
Selection of region for the desired keyboard layout.
The following possibilities are available: Germany, England, France,
Greece, Spain, Sweden and US.
Press key
to arrive the next menu item.
On:
The question referring the customized variable appears once
before the print start at the display.
Auto:
The question referring the customized variable appears after
every printed layout.
Off:
No question appears at the display. In this case the stored default
value is printed.
Press key
to arrive the next menu item.
On:
Continue an interrupted print order after switching on the direct
print module anew.
Off:
After switching off the direct print module the complete data is
lost (see chapter 17.2, page 110).
Press key
to arrive the next menu item.
By a password several functions can be blocked, so the user cannot
work with them. There are several applications in which the use of
password protection makes sense (see chapter 17.3, page 112).
Press key
to arrive the next menu item.
On:
A new print order is only printed after confirmation at the device.
An already active continuing print order is printed as long as the
confirmation is effected at the device.
Off:
No query appears at the display of control unit.
Print after measuring
On:
If an error occurred during printing, whose removal can be
recognized by the module (e.g. transfer ribbon end, cassette open),
then the module changes after the error correction (e.g. cassette
closed again) immediately in the 'ready' mode.
Off:
After removal and confirmation of error, the module changes into
'stopped' mode.
Press key
to arrive the next menu item.
On:
If a print order is started without previous definition of layout, the
standard layout is printed.
Off:
If a print order is started without previous definition of layout, an
error message appears in the display.
Keyboard layout
Customized entry
Hotstart
Password protection
Layout confirmation
D/Me
Standard layout
