Dynacode IP Series
Additional Information
08.16
Operating Manual
109
17 Additional Information
17.1 Column Printing
With this direct print module several columns can be printed, i.e. the
information of one column can be printed several times (depending on
its width) on a layout. Caused by this the use of the complete print
width is possible and the generating time is enormously reduced.
For example 4 columns with a width of 25 mm or 2 columns with a
width of 50 mm can be printed onto a layout with a width of 100 mm.
Please note that the first layout is always the one with the largest x
coordinate, i.e. it has the largest distance to the printhead.
Press key
to access the function menu.
Press key
as long as you arrive the menu
Label layout
.
Press key
to confirm the selection.
Press key
as long as to the menu item
Width/Columns
.
Press keys
and
to set the layout width. The
Width
is the width
of one column, e.g. 20.0 mm.
Press keys
and
to arrive the
Column
input field.
Press keys
and
to change the number of columns, e.g. 4
columns with a layout width of 20.0 mm.
Press key
to start the print with input of number of layouts and
number of lines. The number of layouts corresponds to the number of
layouts that should be printed.
e.g. Columns: 3, Items: 4
The first four layouts were printed but not layouts 5 and 6.
Setting the print of
several columns
