Carl Goldberg Products EXTRA 300, Instruction Manual

Page: 33 / 44

33
27.
■ ■
Locate Former “BB” at a 900 angle to the front
reinforcement and glue.
28.
■ ■
Glue one edge of the 1/32” ply TOP SHEET to the fuse.
Then, using a spray bottle to soak the sheet, slowly roll
to the opposite side, gluing as you go.
NOTE: MARK THE CENTERLINE ON THE TOP SHEET AND
THE FUSE TO INSURE A CORRECT FIT.
■ ■
Sand the edges in line with the firewall and Former “BB.”
29.
■ ■
Install Former “FF directly above Form “F” and at a 900
angle to the fuse top.
30.
■ ■
Mark the centerline onto the horizontal stabilizer and
on the stab platform of the fuselage.
■ ■
Glue the stabilizer to the platform, locating it on the
centerlines and against Former “FF.” Check the
stabilizer to insure that it is parallel to the base.