12
As already done for the outer slat
servo, glue 1 nut to the threaded rod
and remove the clevis from that side.
Mount the servo horn with a servo
tester right-angled.
Install the removed clevis to the inner
horn of the slat.
Mount the servo in the wing and
install the linkage analog to the outer
slat servo.
Now it is important to match both
servo connection extreme exact.
Modern radios will give you enough
channels, but it is recommended to
use a servo matching device such as a
PowerBox, JR Match Box or Futaba
MSA10.
Slat servo installation
