Carel humiSonic UU01F, User Manual

Page: 59 / 68

27
ENG
“Ultrasound for fancoil” +0300059IE - rel. 1.5 - 15.07.2019
“I”
integer variables (Modbus®: REGISTERS) R/W
CAREL Modbus®
63 190 Value of variable on slave unit identifi ed by integer 62 (see paragraph 14.4) R/W
65 192 Parameter C4: Timeout for master serial offl ine R/W
69 196 AA: Waiting time for retry R/W
70 197 Ab: Percentage of A8 for carrying out level test R/W
71 198 Pn: Minimum production R
72 199 bF: Drain activation delay in standby R/W
73 200 AC: Maximum time to measure level when refi lling R/W
74 201 Ad: Maximum time to measure high level R/W
82 209 AE: Restart fan time in standby for integrated probe reading R
87 214 Slave 1 fi rmware release R
89 216 Slave 1 humidifi er status R
92 219 Parameter d3, slave 1: Operating hour counter R/W
93 220 Slave 2 fi rmware release R
95 222 Slave 2 humidifi er status R
98 225 Parameter d3, slave 2: Operating hour counter R/W
99 226 Slave 3 fi rmware release R
101 228 Slave 3 humidifi er status R
104 231 Parameter d3, slave 3: Operating hour counter R/W
105 232 Piezoelectric transducer operating hour counter R
106 233 Parameter d6 Time remaining to end of piezoelectric transducer life R/W
107 234 Parameter AF: Piezoelectric transducer working life R/W
112 239 Parameter bH: Enable probe TH as humidity limit R/W
113 240 Parameter SL: Humidity limit set point R/W
114 241 Parameter bP: proportional band for control with probe TH or external probe R/W
115 242 Parameter bL: limit proportional band R/W
117 244 Parameter d7: manage slave unit production R/W
Tab. 12.b
“D”
digital variables (Modbus®: COILS) R/W
CAREL Modbus®
2 1 Just started fl ag R
3 2 Humidifi er ready to produce R
4 3 Humidity set point reached R
5 4 Green LED R
6 5 Red LED R
7 6 Yellow LED R
8 7 Remote On/Off R
9 8 Low level R
10 9 High level R
11 10 Aux level R
12 11 Autotest completed R
14 12 BMS serial in tLAN mode R
15 14 TAM enabled R
16 15 TAM reading R
17 16 Terminal connected R
18 17 Production in progress R
19 18 Fill R
20 19 Drain R
21 20 Transducer 1 R
22 21 Transducer 2 R
23 22 Fan R
24 23 Alarm relay R
25 24 Auxiliary relay R
26 25 Manual drain R/W
27 26 Disable from serial R/W
28 27 Reset hour counter R/W
29 28 Reset alarms R/W
30 29 Status of dipswitch 8: parallel/series modulation R
31 30 Functional test performed R
33 31 Unit of measure R/W
34 32 Slave 1 online R
35 34 Slave 2 online R
36 35 Slave 3 online R
37 36 Enable control from serial R/W
38 37 Wash activation from serial R/W
39 38 Skip Autotest or washing while in progress R/W
43 42 Reset piezoelectric transducer hour counter R/W
44 43 Backup unit ready for production R
46 45 Production limiting in progress (limit probe function) R
47 46 On/Off control from keypad for master/slave network R/W
49 48 On/off control from master unit keypad R/W
50 49 On/off control from slave unit 1 keypad R/W
51 50 On/off control from slave unit 1 keypad R/W
52 51 On/off control from slave unit 1 keypad R/W
Tab. 12.c