Carel GDWBI20A00, User Manual

Page: 27 / 52

3
ENG
+0300046IE - rel. 1.3 - 05.01.2022
WARNINGS
CAREL bases the development of its products on decades of experience
in HVAC, on the continuous investments in technological innovations
to products, procedures and strict quality processes with in-circuit and
functional testing on 100% of its products, and on the most innovative
production technology available on the market. CAREL and its subsidiaries
nonetheless cannot guarantee that all the aspects of the product and the
software included with the product respond to the requirements of the fi nal
application, despite the product being developed according to start-of-the-
art techniques. The customer (manufacturer, developer or installer of the fi nal
equipment) accepts all liability and risk relating to the confi guration of the
product in order to reach the expected results in relation to the specifi c fi nal
installation and/or equipment. CAREL may, based on specifi c agreements, acts
as a consultant for the positive commissioning of the fi nal unit/application,
however in no case does it accept liability for the correct operation of the fi nal
equipment/system.
The CAREL product is a state-of-the-art product, whose operation is specifi ed
in the technical documentation supplied with the product or can be
downloaded, even prior to purchase, from the website www.carel.com.
Each CAREL product, in relation to its advanced level of technology, requires
setup/confi guration/programming/commissioning to be able to operate in
the best possible way for the specifi c application. The failure to complete such
operations, which are required/indicated in the user manual, may cause the
fi nal product to malfunction; CAREL accepts no liability in such cases.
Only qualifi ed personnel may install or carry out technical service on the
product.
The customer must only use the product in the manner described in the
documentation relating to the product.
In addition to observing any further warnings described in this manual, the
following warnings must be heeded for all CAREL products:
•
prevent the electronic circuits from getting wet. Rain, humidity and all
types of liquids or condensate contain corrosive minerals that may damage
the electronic circuits. In any case, the product should be used or stored
in environments that comply with the temperature and humidity limits
specifi ed in the manual.
•
do not install the device in particularly hot environments. Too high
temperatures may reduce the life of electronic devices, damage them and
deform or melt the plastic parts. In any case, the product should be used
or stored in environments that comply with the temperature and humidity
limits specifi ed in the manual.
•
do not attempt to open the device in any way other than described in the
manual.
•
do not drop, hit or shake the device, as the internal circuits and mechanisms
may be irreparably damaged.
•
do not use corrosive chemicals, solvents or aggressive detergents to clean
the device.
•
do not use the product for applications other than those specifi ed in the
technical manual.
All of the above suggestions likewise apply to the controllers, serial boards,
programming keys or any other accessory in the CAREL product portfolio.
CAREL adopts a policy of continual development. Consequently, CAREL
reserves the right to make changes and improvements to any product
described in this document without prior warning.
The technical specifi cations shown in the manual may be changed without
prior warning.
The liability of CAREL in relation to its products is specifi ed in the CAREL general
contract conditions, available on the website www.carel.com and/or by
specifi c agreements with customers; specifi cally, to the extent where allowed
by applicable legislation, in no case will CAREL, its employees or subsidiaries
be liable for any lost earnings or sales, losses of data and information, costs of
replacement goods or services, damage to things or people, downtime or any
direct, indirect, incidental, actual, punitive, exemplary, special or consequential
damage of any kind whatsoever, whether contractual, extra-contractual or
due to negligence, or any other liabilities deriving from the installation, use or
impossibility to use the product, even if CAREL or its subsidiaries are warned
of the possibility of such damage.
IMPORTANT
NO POWER
& SIGNAL
CABLES
TOGETHER
READ CAREFULLY IN THE TEXT!
Separate as much as possible the probe and digital input cables from
the cables carrying inductive loads and power cables to avoid possible
electromagnetic disturbance. Never run power cables (including the electrical
panel cables) and signal cables in the same conduits.
DISPOSAL
Fig. 1 Fig.2
Please read and keep.
With reference to European Union directive 2012/19/EU issued on 4 July 2012
and related national legislation, please note that:
1.
Waste Electrical and Electronic Equipment (WEEE) cannot be disposed of as
municipal waste but must be collected separately so as to allow subsequent
recycling, treatment or disposal, as required by law;
2.
users are required to take Electrical and Electronic Equipment (EEE) at end-of-
life, complete with all essential components, to the WEEE collection centres
identifi ed by local authorities. The directive also provides for the possibility to
return the equipment to the distributor or retailer at end-of-life if purchasing
equivalent new equipment, on a one-to-one basis, or one-to-zero for
equipment less than 25 cm on their longest side;
3.
this equipment may contain hazardous substances: improper use or incorrect
disposal of such may have negative eff ects on human health and on the
environment;
4.
the symbol (crossed-out wheeled bin – Fig.1) even if, shown on the product or on
the packaging, indicates that the equipment must be disposed of separately
at end-of-life;
5.
if at end-of-life the EEE contains a battery (Fig. 2), this must be removed following
the instructions provided in the user manual before disposing of the
equipment. Used batteries must be taken to appropriate waste collection
centres as required by local regulations;
6.
in the event of illegal disposal of electrical and electronic waste, the penalties are
specifi ed by local waste disposal legislation.
Warranty on the materials: 2 years (from the date of production, excluding
consumables).
Approval: the quality and safety of CAREL INDUSTRIES Hqs products are
guaranteed by the ISO 9001 certifi ed design and production system.