Carel compactSteam XL, User Manual, Page: 10 / 54

10
ENG
“compactSteam XL” +030222060 - rel. 1.2 - 20.12.2010
installer
user
ser
vic
e
3. INSTALLATION
3.1 Positioning
• The compactSteam XL unit is designed for wall-mounting;
• to ensure correct steam distribution, position the humidifi er near the
point of steam distribution steam;
• make sure the humidifi er is vertical, leaving the minimum clearances
(see Fig.3.a and Tab. 3.a for the installation of the duct model and Fig.
3.b and Tab. 3.b for the room model) to ensure safety and allow for the
necessary maintenance operations.
3.2 Mounting
3.2.1 Removing the front cover
The front cover is secured by two screws located in the bottom side of the
unit. Use a phillips screwdriver to remove the screws. The front is clasped
with 2 clips on the top of the back part. To remove the front cover, hold
by the sides pivot the bottom out and lift cover. When installing the cover,
be careful not to over-tighten the screws.
A
B
C
D
E
F
A
B
C
E
Millimeters Inch
A (150 mm) 6”
B (150 mm) 6”
C (150mm) 6”
D (150 mm) 6”
E (600 mm) 24”
F max. 0.2°
Tab. 3.a
Clearance Dimensions
Unit Dimensions:
Fig. 3.a
Fig. 3.c
Fig. 3.d
Fig. 3.b
Millimeters Inch
A 445 mm 17.5“
B 290 mm 12“
C 790 mm 32“
Kilograms Pounds
Weight empty 11kg 24 lbs
Weight packaged 13kg 29 lbs
Weight installed with water 23kg 51 lbs
Tab. 3.b
screws M5 x 16