Alaris™ VP Plus Guardrails™ Volumetric Pump
Service Configuration Mode
1000DF00660 Issue 9
25/48
Service Configuration Mode
This section comprises of a list of options which can be configured . Some can be entered via the Pump
SERVICE
menu, available in
Technician Mode, and others through the Alaris Editor Software .
Enter the access code on the Pump for
SERVICE
mode, then select
CONFIGURATION
, see the Technical Service Manual for details .
Use Alaris Editor to configure the Pump configuration, drug library and units enabled for each data set .
A
Access codes should only be entered by qualified service personnel.
Date and Time
1 . Select
DATE & TIME
from the
CONFIGURATION
menu using the
f
keys and press the
OK
softkey .
2 . Use the
f
keys to adjust the date displayed, pressing the
NEXT
softkey to access the next field .
3 . When the correct date and time are displayed press the
OK
softkey to return to the
CONFIGURATION
menu .
4 . Press the
QUIT
softkey to return to the
SERVICE
menu and press
a
to exit and power down .
Pump Reference
This option is used to add reference text to be shown on the Pump start up display .
1 . Select
PUMP REFERENCE
from the
CONFIGURATION
menu using the
f
keys and press the
OK
softkey .
2 . Use the
f
keys to enter the text and
NEXT
to move to the next character .
3 . When the desired text has been selected press
OK
softkey to return to the
CONFIGURATION
menu .
4 . Press
QUIT
to exit back to the main
SERVICE
menu and press
a
to exit and power down .
Language
This option is used to set the language of messages shown on the Pump display .
1 . Select
LANGUAGE
from the
CONFIGURATION
menu using the
f
keys and press the
OK
softkey .
2 . Use the
f
keys to select the language .
3 . When the desired language has been selected press
OK
softkey to return to the
CONFIGURATION
menu .
4 . Press
QUIT
to exit back to the main
SERVICE
menu and press
a
button to exit and power down .
Backlight and Contrast
This option is used to set the backlight and contrast on the Pump display .
1 . Select
BACKLIGHT & CONTRAST
from the
CONFIGURATION
menu using the
f
keys and press the
OK
softkey .
2 . Use
PARAM
to select either
BACKLIGHT, CONTRAST
or
DIMMING
, as required .
3 . Use the
f
keys to adjust .
4 . When the desired value has been reached press the
OK
softkey, then
QUIT
to get back to the
SERVICE
menu and press
a
to exit
and power down .
