Buttons
1. ENTER:
●
In "stop" mode, press ENTER button to enter into program selection and setting value which flash in
related window.
A: When you choose the program, press Enter to confirm the one you like.
B: When in setting, press ENTER to confirm the value that you would like to preset.
●
During the start mode, press ENTER to choose display the speed or RPM, or switch automatically.
2. START/STOP:
●
Press START/STOP button to start or stop the programs.
●
During any mode, hold down this button for 2 seconds to totally reset the computer.
3. UP:
●
In stop mode and the dot matrix character flash, press this button to select the program up. If the
related window value flash, press this button to increase the value.
●
During the start mode, press this button to increase the training resistance.
4. DOWN:
●
In stop mode and the dot matrix character flash, press this button to select the program down. If the
related window value flash, press this button to decrease the value.
●
During the start mode, press this button to decrease the training resistance.
5. RECOVERY:
●
First test your current heart rate and show your heart rate value, press this button to enter into pulse
recovery testing.
●
When you are in pulse recovery mode, press this button to exit.
NOTE: To press or rotate of UP, DOWN button should be followed by different model.
It is suggested to cover your finger within the marked region to select functions in case of any wrong
action.
Functions
GB
Summary of Contents for 50528
Page 54: ......
