RX
50
46
5
TROUBLESHOOTING, CARE AND MAINTENANCE
5.1
General Instructions
⚠
WARNING
+
Do not make any improper changes to the equipment.
⚠
CAUTION
+
Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the
contract partner. The equipment must not be used until it has been repaired. If necessary,
use only original spare parts.
࣑
ATTENTION
+
In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians.
5.2
Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Fault
Cause
Solution
Display shows
nothing
Console has no power
+
Press and hold the RESET button to
restart the console
+
Disconnect the device from the
power supply for approx. 15 seconds.
+
Contact a service technician and have
the console replaced if necessary.
Heart rate not
received
+
Sources of interference in
the room
+
unsuitable chest strap
+
Batteries empty
+
Eliminate sources of interference
(e.g. mobile phone, loudspeakers,
WLAN, lawn mower and vacuum
cleaner robot)
+
Use a suitable chest strap (see
recommended accessories).
+
Reposition chest strap and/or
moisten electrodes
+
Changing batteries
Grinding noises on
the guide rail
Guide rail not lubricated
Clean the guide rail with a towel
(without solvent!) and apply a small
amount of suitable lubricant to the
guide rail. Remove excess residue.
Creaking noises
Loose screw connections
Check that all screws are tight
Summary of Contents for CST-RX50-2
