Cardionics SimScope, User Manual

Page: 13 / 24

12
4. The open dialog box will pop up. Navigate to the zip file
containing the new sounds. Note: Only a file name with
matching serial number is compatible with the connected
device. Select the file and click open.
5. The files are extracted and saved to the device. Large libraries
will take longer to download than short ones. This step may
take some time to complete.
6. Once the sounds are downloaded a pop-up message will
appear. Click okay. The new sound or sounds will be
permanently visible in the Library pane and ready for use.
SimScope Wi-Fi Configuration
SimScope with Wi-Fi capability require information regarding the wireless
environment before use. The default settings that come preloaded from
factory (see Figure 2) are common to most networks except for the
SSID, pass phrase and possibly the security/authentication setting. In
some cases, it may be easier to refer the Wi-Fi setup to a network
administrator. Obtain the SSID and pass phrase of the wireless network
before proceeding. Note: A SimScope supplied with a Bionic Hybrid
Simulator system is already configured to work with the Bionic Hybrid
Simulator. No setup is necessary.
1. Run the SimScope PC application on a computer connected to
the network.
2. Connect the SimScope to the PC using the USB cable.
3. After the PC application displays “SimScope ready” click the
icon to display the Wi-Fi configuration window.
Only fill in the network settings located under the SimScope Wi-Fi
Configuration heading (right column). Refer to Table 2 on page 13 for
explanations on each setting. In some cases, updating the SSID and
pass phrase first while leaving the rest of the settings to default is the
best approach. Refer to Figure 2 on page 13 as an example.
4. Make sure that the check box “Enable Wi-Fi Module” is
checked. Click the “Save” button to save settings.
5. Click the “Test” button to test the Wi-Fi settings. A message will
appear in the bottom-left corner indicating pass or fail. If the
test fails, verify the settings and try again.