Cardionics SimScope, User Manual

Page: 16 / 24

15
Name Function
TCP Port (right
column)
Transmission Control Protocol Port. Default is
14046. Socket used for SimScope communication
data. This value must match the SimScope TCP
Port value found in the left column of the window.
UDP Port User Datagram Protocol Port. Use a default value
of 0 for multicast compatible networks. Other type
of network use a value of 14047. Used for pulse or
timing beacon with automated systems or
accessories requiring synchronized actions with the
SimScope heart rate or carotid pulse event.
Multicast UDP
Port
User Datagram Protocol Port. Use a default value
of 14047 for multicast compatible networks.
Otherwise, use a value of 0.
Network Type
Type of network. Infrastructure or Ad-hoc network.
The default is infrastructure.
Feature Bitmap Configures different sub-features in the SimScope
Wi-Fi module. Not available for edit.
Mode 5 Pin
USB
Default value of 0. Configures the fifth pin on the
USB connector as an output for pulse or timing
beacon. Used for pulse or timing beacon with
automated systems or accessories requiring
synchronized actions with the SimScope heart rate
or carotid pulse event.
TCP/IP Feature
Bitmap
Configures different sub-features in the SimScope
Wi-Fi module. Not available for edit. Default value
is 4.
Custom Bitmap Configures different sub-features in the SimScope
Wi-Fi module. Not available for edit. Default value
is 1.
Join Feature
Bitmap
Configures different sub-features in the SimScope
Wi-Fi module. Not available for edit. Default value
is 16.
Debug Bitmap Enables playback error messages to user. Not
available for edit. Default value is 1.
Type of Service Default is ‘0’ for “Best Effort.” Not commonly
modified.