Cardioline XR600, User Manual

Page: 25 / 36

User Manual: um_xr600_cardiolinespa_09_eng1
25/36
Cardioline S.p.A. Via Linz,19-20-21 38121 Spini di Gardolo (TN) info@cardioline.it
www.cardioline.com
Sede commerciale: Via F.lli Bronzetti, 8 20129 Milano (MI) Italia tel.+39 02 94750470 fax +39 02 94750471
xr
600
 Delta Speed (km/h): Speed increment pushing “+ speed” key;
 Delta Inclination (%): Inclination increment pushing “+ inclination” key;
 Autostop pause (sec): reset time;
 Warm up time (mm:ss): warm up time;
 Cooldown time (mm:ss): cooldown time;
 Warm up speed (km/h): warm up speed;
 Cooldown speed (km/h): cooldown speed;
 Enable WiFi conection: This feature is not available;
 Enable RS232 connection: Enable/Un-enable the RS232 connection by cable (it’s necessary to switch off and on
the machine to memorize the new set up);
 Enable reverse speed: Enable/Un-enable the reverse speed;
 Enable Beep: Enable/Un-enable beep sound at key pressure;
 Beep over Cardio HB: Enable/Un-enable beep sound alarm when HB level goes over the HB pre-set max value;
 Max reverse speed (km/h): max reverse speed value.
Use the arrow to return back or push CONFIRM key to confirm the selection.
Default per Test:
It’s possible to see or set up some default values as :
 CHR initial speed (Km/h): initial speed of CHR test;
 CHR duration (sec): time of CHR test;
 CHR Freq. add speed (sec): updating time of speed during CHR test;
 CHR Incr. speed step: number of time that “Delta speed” is changed during CHR test;
 CWL Duration (sec): time of CWL test.
Use the arrow to return back or push CONFIRM key to confirm the selection.
Input protocol:
It’s possible to see or set up the protocol name of communication by RS232 output, the serial speed, the serial delay
(ms) and the unit of measurement speed (kmh/mph).