Cardioline XR600, User Manual

Page: 24 / 36

User Manual: um_xr600_cardiolinespa_09_eng1
24/36
Cardioline S.p.A. Via Linz,19-20-21 38121 Spini di Gardolo (TN) info@cardioline.it
www.cardioline.com
Sede commerciale: Via F.lli Bronzetti, 8 20129 Milano (MI) Italia tel.+39 02 94750470 fax +39 02 94750471
xr
600
Use the arrow to return back or push CONFIRM key to confirm the selection.
Machine data:
It’s possible to see or set up some values as :
 Total (km): see the total km of machine;
 Partial (km): see the km made from last extraordinary lubrication;
 Partial value setting (km): see / set up the km when the treadmill must make the extraordinary lubrication;
 Last extraordinary lub. (km): see the km when the treadmill made last extraordinary lubrication;
 Inclination for lubrication (%): see / set up inclination level during the extraordinary lubrication;
 Lubrication speed (km/h): see / set up the speed during the lubrication;
 Pumps number to change oil can: Pumps number after that the oil can alarm turns on;
 Oil can pumps number: see / reset the oil can pumps number (one every turning on operation);
 Wait self lubrication (sec): Waiting time to make extraordinary lubrication operations;
 Make extraordinary lub. in the next start: if “ON” the traedmill makes an extraordinary lubrication in the next
start even if the necessary km are not reached;
 Extraordinary lubrication pumps number: Number of oil pumps during the extraordinary lubrication;
 Time next reset (hh:mm:ss): Count down timer of inclination motor reset;
 Forced incline range reset (hh): time after that the inclination motor makes an automatically reset, without
moving the running belt, to cancel moving errors;
 Time total functioning (mm): see the time total functioning of machine;
 Max time exercise (mm): see / set up the maximum time of each exercise;
 Multiplicative coefficient calories: see / set up the value to change the calories calculation;
 Zoom graphic: if “ON”, touching the graphic during the exercise, you will see it wider while touching again the
screen it will return small.
Use the arrow to return back or push CONFIRM key to confirm the selection.
Basic setting:
It’s possible to see or set up some values as :