CARDIO STRONG EX90 PLUS, Assembly And Operating Instructions Manual

Page: 21 / 52

21
EX 90 PLUS
Step 12: Function buttons to adjust the stride length:
1) There is a button on the left and right small handles of the console mast.
The left button has the following function: The fine, infinitely variable reduction of the
current stride length. The right button has the following function: The fine, infinitely
variable increase of the current stride length.
2) If the stride length is reduced, the DOWN signal on the function button will light
up in green.
If the stride length is increased, the UP signal on the function button will light up in
red.
The button for adjustments will not react as long as the stride length is being
changed through the button and the LED light is blinking. The button only works
if the LED light is illuminated. If there are disruptions while training, simply press
any stride length adjustment button and the training can be continued.
Step 13: Setting the stride length via the incline motor
Corresponding to personal requirements, the stride length, as shown on the LED
display, can be set or changed to 18”, 20”, 22”, 24” or 26”. There are five quick selection
buttons to set the stride length. Press one of the 18” - 26” buttons to set the desired
stride length. You can change the stride length at any time during training. The
selected stride length is displayed through the blue LED light.