25
BPAro
ENG Revision A
Technical Specifications
6.4
Maintenance
Checks before each use
•
Before each use, visually check the device and the
cables for signs of mechanical damage.
If you detect damage or impaired functions which may
result in a hazard to the patient, the operator or third
persons, the device must be repaired before it can be
used again.
Technical Safety Inspections
•
For safety, the device requires regular maintenance.
To ensure functional and operational safety of the
ABPM devices, Technical Safety Inspections
should be carried out at least every two years.
The checks are carried out within the framework of a
service agreement; please contact CardiAI for details.
The nature and extent of the inspections are described
in the corresponding sections of the Service Manual.
Upon request, CardiAI provides a Service Manual.
The device does not require any other maintenance.
Technical Inspections of the Measuring System
•
The non-invasive pressure measurement system of
the ABPM devices should be inspected every two
years.
The checks are carried out within the framework of a
service agreement; please contact CardiAI Service for
details.
The nature and extent of the inspections are described
in the corresponding sections of the Service Manual.
Upon request, CardiAI provides a Service Manual.
6.5
Disposal of the Product
The products described in this operator manual must not
be disposed as unsorted municipal waste and must be
collected separately. Please contact an authorized
representative of the manufacturer for information
concerning the decommissioning of your equipment.
The cuffs can be disposed as contaminated hospital waste.
Caution
These checks shall be carried out by authorized
companies.
Caution
These checks shall be carried out by CardiAI or
authorized companies.
