Part Number 3E1086 R2
5
September 2002
Removing the Facia
To remove the facia from the Prox Plus 125 base you need the plastic de-latching tool
(Part No. C41612) shown below.
Slide the de-latching tool firmly under the bottom of the Prox Plus 125 reader.
Hold the top of the reader with your fingers and squeeze the de-latching tool up, towards
the top of the reader with your thumb.
Lift the facia away from the base.
If the base is not flush to the wall, or the screws have become loose you may need to
pack the space between the de-latching tool and the wall. A thin piece of cardboard is
usually all that is necessary, i.e. a business card folded in two.
Cut a notch in the folded edge of the card similar in shape to the notch in the de-latching
tool as shown below.
Slide the card under the bottom of the facia and then use the de-latching tool with the card
as packing.
