Carbatec TJ-X300C, Owner'S Manual

Page: 6 / 45

socket. Keep your fingers in a distance from belts and belt pulleys.
- hile replacing electrical parts of the equipment, turn off the s witch and
disconnect the plug from supply socket. Faulty parts should be replaced only
with products having the same specifications as the original ones.
-
Do not remove or interfere otherwise in safety devices such as covers, limit switches,
and do not block them mutually.
- Do not switch the machine on before all covers removed for the purposes of
maintenance are put in their places again.
- Always keep the maintenance area including the working place clean.
- Any maintenance work must be done by a qualified staff in accordance with the
instructions issued by the machine manufacturer.
- ead the instruction manual for maintenance men carefully and completely.
- For replacement of parts and necessary things, get in advance
those being identical with the original type and complying with standards.
- se only specified kinds or lubricating oils and grease or those equivalent to
them.
- If any belt in the set of belts used gets longer than the limit prescribed, replace
the whole set completely.
- Do not use compressed air to clean the machine or to remove chips.
- Always check the results while a responsible person is present.
Safety regulations for place of work
- Always ensure a sufficient working area and free access to the machine and
peripheral devices.
- Put tools and any other obstacles in the place designed for this purpose, in a
distance from the machine.
- Ensure sufficient lighting in the working area which will not create shadows or
cause the stroboscopic effect. For safe and quality work the hygienic standards
specify the minimum intensity 500 l
u x.
- Never put any tools or any other objects on working tables or covers.
- Always keep the working area clean and tidy.
Transport and storage
Transport and storage
hile transporting or handling the machine, be most careful and let this activity be
done by qualified personnel especially trained for this kind of activity.
hile the machine is being loaded or unloaded, make sure that no person or subject
gets pressed by the machine !
Do not enter the area under the machine lifted by a crane or a high-lift trolley!
During transporting or storing the machine, means must be taken to protect the