FOR TEC HNICAL SUPPOR T CALL
1800 658 111
BS-245H
OPERATION
2.
Start the machine, waiting until
it is running at full speed, before
presenting the timber to the blade.
3.
Slowly advance the timber to the
required line to begin cutting, slowly
turning the timber to follow your
pattern.
Fig. M1
4.
With smaller radius cuts, slow the
feed speed down, and rotate the
timber, watching and listening for
excessive blade twist and burning.
Retract or reverse the rotation and
slowly nibble away at tight radius and
complex corners.
Fig. M2
5.
If you find yourself in a difficult cut
where you cannot continue, don’t
force the work through but switch
off your saw, wait for it to stop and
manually removing or reverse the
board from the cut.
6.
Turn the bandsaw off immediately
after completing your cut, and wait
for the blade to come to a complete
stop before making adjustments or
reaching anywhere near the blade.
7.
Complex curve cutting can also
be done with the table tilted to the
required angle (as shown in setup and
adjustments). Ensure you follow these
same principles for bandsaw setup
and use.
Fig. M3
Fig. M1
Fig. M3
Fig. M2
28
