FITTING TO THE STAND
FOR TEC HNICAL SUPPOR T CALL
1800 658 111
BS-245H
You may require assistance for the
following step. Lift the main body up and
onto the top of the stand. Be aware of the
exposed bandsaw blade while lifting.
6.
Take care to align the 4x protruding
bolts on the stand, with the 4x holes
on the base of the main bandsaw
body.
Fig. B7
7.
Using the 4x remaining wash and
nuts, attach the main body to the
stand, and tighten.
Fig. B8 & B9
8.
At this stage, please ensure the entire
unit is sitting level, and then proceed
to tighten the 24x nuts on the stand
itself.
NOTE: Check for any visible damage which
may have occurred during transport. If
a damage is detected notify your dealer
immediately.
Fig. B7
Fig. B8
Fig. B9
!
18
