Caravaggi Bio 100, Use And Maintenance Instruction Manual

Page: 7 / 29

6. SAFETY NORMS
Training
•
The machine must not be used by under 16’s and persons who
have not learnt the user instructions .
•
The operator is responsible for third parties present in the work
area . Keep children and domestic animals at distance when the
bio-chopper is in operation .
•
This machine may be used only for cutting up natural wood and
foliage . It must not be used for other purposes ( e.g. for
breaking up bottles and boxes in other materials ) .
•
Work only in adequate light .
•
When you start up engine check that machine is equipped with
the prescribed guards .
•
Wear protective gloves and goggles while working .
Preparation / Operation
•
Before begenning work check that the blades and the cutters are
perfectly fixed. If the blades show signs of damage they should
be sharpened or replaced .
•
Do not use the bio-chopper when it is raining .
•
The bio-chopper must be positioned on a flat , solid surface
where there is no danger of overturning .
•
Switch off the motor, remove the keys from the start panel and remove
the sparkplug cap ( the power supply cable for electric motor bio-
choppers , or check that the machine is disconnected from the
tractor PTO ) in order to :
- remove foreign bodies from the hoppers ;
- transport the machine or move it from the workplace ;
- carry out maintenance or cleaning ;
-
leave the machine unattended .
•
The blades continue to turn for a few seconds even after the
ignition has been switched off .
•
Assemble the blades following the appropriate instructions and
use only original spare parts supplied by the manufacturer .
•
Never use the chopper with defective guards and protection or
without the safety devices correctly fitted .
•
Start up the engine with care and following the user instructions .
When the engine is functioning it is imperative to prevent anyone
from approaching the loading hopper , the discherger and the
side hopper .