background image

1.  HOW  TO  USE  AND  KEEP  THE  INSTRUCTION  MANUAL

 

 
This  instruction  manual  is  aimed  at  the  user  of  the  machine ,  
the  owner ,  the  maintenance  cleaning  operator  and  the  repair  
technician  and  must  always  be  avaiable  for  consultation . 
The  instruction  manual  shows  the  user  for  which  the  machine  
was  designed  and  the  machine’s  technical  characteristics .  It  
also  supplies  instructions  for  transport ,  cleaning  adjustment ,  
use ,  personnel  informations ,  maintenance ,  spare  parts  
ordering  and  residual  risk ,  and  warnings  with  regard  to  
operations  that  must  be  carried  out  with  particular  care . 
The  machine  is  for  professional  use ,  so  the  instruction  manual  
can  never  be  a  substitute  for  suitable  user  experience . 
The  manual  should  be  considered  a  part  of  the  machine  and  
must  by  kept  for  future  reference  until  the  machine  is  
demolished . 
The  instruction  manual  must  always  be  avaiable  for  
consultation  and  must  be  kept  in  a  dry ,  protected  place . 
In  the  case  of  loss  or  damage  the  user  may  request  a  
replacement  from  the  manufacturer ,  quoting  the  series  
reference ,  type  and  year  of  construction  which  are  shown  on  
the  plate  fixed  to  the  bio-chopper  ( section 5 ) . 
The  manufacturer  reserves  the  right  to  update  production  and  
manual  without  the  obligation  to  update  earlier  production  and  
manuals . 
The  manufacturer  is  relieved  from  all  responsability  in  cases  of 

• 

improper  use  of  the  bio-chopper ; 

• 

uses  not  conforming  with  what  is  expressly  specified  in  this  
documentation ; 

• 

serious  deficientes  in  prescribed  and  recommended  
maintenance ; 

• 

unauthorised  modifications  or  interferences ; 

• 

use  of  spare  parts  that  are  not  original  or  model  specific ; 

• 

total  or  partial  failure  to  follow  the  instructions ; 

• 

force  majeure ; 

 
 
 

Summary of Contents for Bio 100






























Reviews: