14
13
●
●
1
2
M E M O
TOP
K
P14
P13
2017.01月
初
版
Mac
Illustrator
CS6
DC3000
Optional add-ons
Using
this Product
Safely
Preparation
Installation
Capturing
Images/V
ideo
V
iewing/Deleting
Media
Changing
Camera Settings
T
roubleshooting
Visit our website below for more details.
http://daction.carmate.jp/
Preparation
Battery Kit Add-On (DC100)
Security Add-On (DC200)
Please purchase the following optional add-ons according to your needs.
(Available as of January 2017)
Battery pack
Terminal portion
Battery charger
This is a cable set that allows the camera to receive electric
power from the battery in your car while it is parked, and
keep it under surveillance.
*To prevent possible damage to the memory card, do not remove the memory card during data backup, formatting,
while resetting your PC system or during operation.
*Ensure to back up important data on other devices. Some data on the memory card may be overwritten during use.
*To prevent possible malfunction, do not store data that has been saved on a device other than this Product.
*Always check the orientation of the memory card; inserting it in the wrong orientation may lead to breakage or
malfunction.
*Before removing the memory card, ensure the power is switched off. Removing it while the power is on may cause
breakage of the card and/or corruption of data.
*If the memory card has become hot after using it for long amount of time, to avoid potential burns, do not allow it to
come into direct contact with your skin.
*Using incompatible memory cards may cause loss of
data and/or recording failure.
*Some third-party memory cards may be recognized
more slowly, or be difficult to insert/remove.
*Depending on the memory card capacity, start-up of
the Product may take longer.
This is a portable battery unit with built-in lithium-ion
batteries.
By attaching this unit to the camera body, you can use
the camera outside of your car.
Ensure the power is switched off.
Inserting the memory card
Ensure the power of the camera body is switched off, and that all the LEDs are off.
Open the cover on the camera body. Firmly insert the memory card
in the correct orientation until it clicks into place.
When removing the memory card, push it in until you hear a click,
and release to allow a portion of the memory card to emerge from
the camera body. Slowly pull out the pushed-out portion to remove
the memory card.
Inserting the memory card
Removing the memory card
Before using a third-party memory card,
please check the compatibility below.
Card type
Speed class
Capacity
microSDHC or microSDXC
UHS-I - Speed class 3 or higher
16GB – 128GB
(As of January 2017)
