5
THE RECHARGEABLE WORK LIGHT MUST BE FULLY CHARGED BEFORE BEING USED
FOR THE FIRST TIME. IT IS RECOMMENDED THAT THE BATTERY BE RE-CHARGED
EVERY 3 MONTHS TO ENSURE MAXIMUM PERFORMANCE IN AN EMERGENCY.
This will ensure that the battery gives its best performance now and on future
re-charging cycles. The AC charging adapter is for re-charging the battery only.
Always ensure that the light switch is in the OFF position while charging.
Note: Recharge unit when only one green LED light from the battery status
indicator comes ON.
USING THE AC CHARGING ADAPTER:
1. Plug the AC charger into the charging port on the base of the unit next
to the charging LED indicator.
2. Plug the AC adapter into a 120V outlet and switch ON the outlet (if
applicable).
3. The battery will be fully charged after approximately 5-6 hours,
4. Disconnect the AC charger from the light and remove the adapter from
the wall outlet.
NOTE: TO PREVENT OVERHEATING DO NOT CHARGE FOR MORE THAN 8 HOURS.
CHARGER
INPUT
ON/OFF
POWER SWITCH
CHARGING INSTRUCTIONS