Captain 273 4WD Operator'S Manual Download Page 89

Page: 89 / 121

OPERATOR MANUAL

CAPTAIN 273 4WD

Remove the level plug (2) (Fig. 5-15) from the central axle housing. The oil level must reach the hole.
Top up if necessary with oil of the specified type through the plug (2) (Fig. 5-15).

NOTE:

See the fuel and lubricant chart for the correct type of oil.

5.34 OPERATION 13
Miscellaneous inspections

•

Hand brake lever: make sure that the ratchet mechanism locks in a secure and stable way.

•

Make sure that the wheel nuts are correctly torque. Make sure that the safety frame screws are well

tightened.

•

Make sure that all other nuts and bolts are well tightened.

•

Check the tyres pressure.

Safety frame

Have your Dealer's specialized personnel check to make sure that the safety frame fixing screws are

correctly tightened.

WARNING:

The safety frame complies with certain safety standards. It must never be drilled or

modified in order to install accessories or

implements

It is

FORBIDDEN to weld on accessories

or repair the safety frame by welding.

Dashboard control coatings

CAUTION:

Use water and a neutral detergent to clean the coating of dashboard and controls. Any

commercial product to clean car interiors may be used. DO NOT use any kind of solvents or alcohols.

Summary of Contents for 273 4WD


























































































































Search results

Summary of Contents for 273 4WD

Reviews:

Related manuals for 273 4WD

Brands by name

Popular brands

Captain 273 4WD, Operator'S Manual

Search results

Summary of Contents for 273 4WD

Reviews:

Related manuals for 273 4WD

Brands by name

Popular brands