Captain 273 4WD Operator'S Manual Download Page 83

Page: 83 / 121

OPERATOR MANUAL

CAPTAIN 273 4WD

5.26 OPERATION 5

Engine coolant radiator

Periodically check to make sure that the radiator (D (Fig. 5-7) is

not clogged. Clean with a jet of compressed air directed from

the inside towards the outside.

WARNING:

These operations must be carried out when

the engine is cold. When hot, the grilles and radiator

will burn the hands and fingers.

NOTE: The best results are obtained with a steam cleaver that

softens up the dirt. Use a lamp to check the cleaning between

the radiator fins. We recommend a daily cleaning when Tractor

is used int the excess dust operation and chances of radiator

chocking.

5.27 OPERATION 6

Air filter discharge valve Fig. 5-8

Discharge the dust deposits and sediments each day by
pressing the rubber valve (2) on the air filter housing (1)

5.28 OPERATION 7

External cartridge of dry air filter

WARNING:

Always stop the engine before ' demounting the filter elements.

Fig.5-7

Fig.5-8

Summary of Contents for 273 4WD


























































































































Search results

Summary of Contents for 273 4WD

Reviews:

Related manuals for 273 4WD

Brands by name

Popular brands

Captain 273 4WD, Operator'S Manual

Search results

Summary of Contents for 273 4WD

Reviews:

Related manuals for 273 4WD

Brands by name

Popular brands