Captain 273 4WD Operator'S Manual Download Page 88

Page: 88 / 121

OPERATOR MANUAL

CAPTAIN 273 4WD

5.32 OPERATION 11

Parking brake - Fig.5-14

The parking brake lever acts directly on the main brakes.

Make sure that free travel is identical for both pedals, since free

travel of the pedals dictates the free travel of the parking brake

and left/right distribution of the braking action when the

brakes are locked. Once you have adjusted the brake pedals,

adjust the free travel of the parking brake. (Fig.5-14) on the

control linkage on the left side of the tractor, so that the

parking brakes engage after clicks of the ratchet mechanism,

sensed on the release button (2) of the lever.

Parking brake adjustment

Parking brake lever.

Release button.

5.33 OPERATION 12

Front axle oil level

4WD front axle

Regularly check the oil level in the differential of the front axle
and in the front axle side final drives. Park the tractor on level
ground.

Position the final drive plugs) (Fig. 5-15) on the wheel center
line. Remove the plugs and check the level. Top up if necessary
with oil of the specified type through the plugs.

(Fig.5-14)

(Fig.5-15)

Summary of Contents for 273 4WD


























































































































Search results

Summary of Contents for 273 4WD

Reviews:

Related manuals for 273 4WD

Brands by name

Popular brands

Captain 273 4WD, Operator'S Manual

Search results

Summary of Contents for 273 4WD

Reviews:

Related manuals for 273 4WD

Brands by name

Popular brands