Instruction manual DI652
44
Please keep this instruction manual for future reference
Detergent left in
dispenser
Dishes block detergent
dispenser.
Re-loading the dishes properly.
The dishes aren’t drying
Improper loading.
Load the dishwasher as suggested in the directions.
Dishes are removed too soon.
Do not empty your dishwasher immediately after washing.
Open the door slightly so that the steam can come out. Take
out the dishes until the inside temperature is safe to touch.
Unload the lower basket first to prevent the water dropping
from the upper basket.
Wrong programme has
been selected.
With a short program, the washing temperature is lower,
decreasing cleaning performance. Choose a programme with
a long washing time.
Use of cutlery with a low-
quality coating.
Water drainage is more difficult with these items. Cutlery or
dishes of this type are not suitable for washing in
the dishwasher.
E R R O R C O D E S
If there is a malfunction, the dishwasher will display error codes to identify these:
C O D E S
M E A N I N G S
P O S S I B L E C AU S E S
E 1
Longer inlet time.
Tap is not opened, or water intake is restricted, or water
pressure is too low.
E 3
Not reaching required
temperature.
Malfunction of heating element.
E 4
Overflow.
Some element of dishwasher leaks.
E 8
Failure of orientation of
distributary valve.
Open circuit or break of distributary valve.
E C
Washing control system fail.
PCB or motor fail.
E d
Failure of communication
between main PCB with
display pcb.
Open circuit or break wiring for the communication.
WARNING:
»
If overflow occurs, turn off the main water supply before calling a service.
»
If there is water in the base pan because of an overfill or small leak, the water should be
removed before restarting the dishwasher.
