Instruction manual DI652
15
Please keep this instruction manual for future reference
The salt container is located beneath the lower basket and should be filled as explained in
the following:
WA R N I N G :
O N LY U S E S A LT S P E C I F I C A L LY D E S I G N E D F O R D I S H WA S H E R S U S E :
Every other type of salt not specifically designed for dishwasher use, especially table salt,
will damage the water softener. In case of damages caused by the use of unsuitable salt the
manufacturer does not give any warranty nor is liable for any damages caused.
WA R N I N G :
O N LY F I L L W I T H S A LT B E F O R E R U N N I N G A C Y C L E
This will prevent any grains of salt or salty water, which may have been spilled, remaining on the
bottom of the machine for any period of time, which may cause corrosion.
Please follow the steps below for adding dishwasher salt:
1. Remove the lower basket and unscrew the reservoir cap.
2. Place the end of the funnel (supplied) into the hole and pour in about 1.5kg of
dishwasher salt.
3. Fill the salt container to its maximum limit with water, it is normal for a small amount of water
to come out of the salt container.
4. After filling the container, screw back the cap tightly. The salt warning light will turn off after
the salt container has been filled with salt.
5. Immediately after filling the salt container, a washing program should be started (we suggest
to use a short program). Otherwise the filter system, pump or other important parts of the
machine may be damaged by salty water. This is out of warranty.
10
1.
Remove the lower basket and unscrew the reservoir cap.
2.
Place the end of the funnel (supplied) into the hole and pour in about 1.5kg of
dishwasher salt.
3.
Fill the salt container to its maximum limit with water, It is normal for a small
amount of water to come out of the salt container.
4.
After filling the container, screw back the cap tightly.
5.
The salt warning light will stop being after the salt container has been filled with salt.
6.
Immediately after filling the salt into the salt container, a washing program should
be started (We suggest to use a short program). Otherwise the filter system, pump
or other important parts of the machine may be damaged by salty water. This is
out of warranty.
NOTE
:
The salt container must only be refilled when the salt warning light ( )
in the
control panel comes on. Depending on how well the salt dissolves, the salt
warning light may still be on even though the salt container is filled.
If there is no salt warning light in the control panel (for some Models), you can
estimate when to fill the salt into the softener by the cycles that the dishwasher
has run.
If salt has spilled, run a soak or quick program to remove it.
Please follow the steps below for adding dishwasher salt:
L OA D I N G T H E S A LT I N TO T H E S O F T E N E R
NOTE:
If your model does not have any water softener, you may skip this section.
Always use salt intended for dishwasher use.
