Caple DD931BK, Instruction Manual

Page: 26 / 46

25
EN
Maximum continuous operation of a particular hotplate is limited, and the duration is displayed in the
above chart. When the hotplate is switched off by the safety mechanism, the indicator displays symbols
“0”, or “H” in case there is any remaining heat left.
In such cases switch the hotplate off by touching the slide sensor (
F ) at the start, bring the power set-
ting to “0”.
Power setting 1 2 3 4 5 6 7 8 9
Hours lapse prior
safety switch off
6 6 5 5 4 1,5 1,5 1,5 1,5
Example: Set the hotplate to power level 5 and leave it operate for some time. If you do not change the
above setting, the safety mechanism will switch the hotplate off after 4 hour.
SAFETY SWITCH OFF
Induction hotplate is also fitted with safety device against overheating which protects electronic parts
from damages. This device operates on several levels. When temperature of the hotplate excessively
rises, it switches on two-stage fan. If this is not enough, extra powerful heating is deactivated, and finally
the safety device either reduces the heating power of certain hotplates or turns them off completely.
When the hotplate cools off, the full power of hotplate is again available.
PROTECTION FROM OVERHEATING
CHEF COOK FUNCTION
T
hrough a Quick Start button,
it
makes it possible to activate the four cooking zones with pre-set
power levels.
• Heating (kept warm)
• Low temperature (Delicate cooking)
• Medium temperature (slow cooking)
• High temperature (Boiling or fast cooking)
The chef cook function is useful for professional cooking.
Activation of the Chef Cook function:
• Press the sensor ( I ) after turning on the hob. All displays will show the configuration as in the image
below.
A I
9 6 3
Disabling of the Chef Cook function:
• Press sensor ( I ). All displays will turn off except the LED above the sensor ( A ) to indicate that the
hob is still on.