Caple DD931BK, Instruction Manual

Page: 25 / 46

24
EN
Deactivating Bridge Function
• The end of the Bridge Function can be done by repeating the simultaneous selection of both cooking
elements (the same as activation).
If the bridge function is deactivated while in operation, than both cooking elements go to level “0” and
can then be set again.
The warming function is used to keep cooked food warm.
Hence this function can also be used as melting or simmer function.
Activating heating function:
• Pressing the special function key ( G ) of a cooking zone activates the “melting” function. The first LED
is activated.
WARMING FUNCTION
• If the special function key is pressed a second time “warming” level two is activated. The second LED
is activated.
• If in 10 uninterrupted minutes no cookware is detected on one of the two elements, the bridge func-
tion is automatically deactivated, the uncovered cooking element is switched off and the covered
cooking element remains as the single cooking element switched on with the set cooking level.
G G A
6 3
G G
4
G G A
6 3
G G
4
• If the special function key is pressed a third time “simmering” level three is activated. The third LED
is activated.
G G A
6 3
G G
4
If the special function key is pressed a fourth time the warming function ends.