Caple DD931BK, Instruction Manual

Page: 11 / 46

10
EN
INSTALLATION OF THE
COOKING HOB WITH
INTEGRATED DOWNDRAFT
CAUTION!
• The installation and the connection of the
product to the mains electricity must only be
carried out by qualified personnel.
• The kitchen unit into which the product is to
be installed must be realised in materials (in-
cluding adhesives and finishes) that are resist-
ant to a temperature of 100°C.
• After the installation, the product must be ac-
cessible for any eventual technical interven-
tions.
• All wall units above the product must be posi-
tioned at a height that does not disturb work
processes.
• The cornice of the worktop can have a thick-
ness greater than the worktop because an
opening is maintained in the front part of the
kitchen unit of at least 5mm (refer to design
below) to ensure an adequate passage of air
to avoid overheating the product.
• Before cutting the hole, check inside the
kitchen unit where the product will be housed
to ensure that there are no obstructions such
as parts of the unit’s structure or anything else
that could cause problems for a correct instal-
lation. Check that the overall dimensions of
the downdraft and the cooking hob are com-
patible with the kitchen furniture so that the
installation is feasible.
• Induction hob may be built into the 25 to
40 mm thick worktops.
BUILT-IN INDUCTION HOB
OPENING DIMENSIONS
A (mm) 898
B (mm) 510
C (mm)
860
D (mm) 490
E (mm) 45
F (mm) 5
G (mm) 50
External motor