Caple C856i Instruction Manual Download Page 7 | Manualshive

Page: 7 / 36

Caple C856i Instruction Manual Download Page 7

Instruction manual C856i

Please keep this instruction manual for future reference

7

kitchen when the hob is in use.

- Persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge

must be supervised and given appropriate

instruction concerning the use of the appliance in

a safe way and understand the hazards involved.

- Do not repair or replace any part of the appliance

unless specific instructions are detailed in the

manual. All other servicing should be done by a

qualified technician.

- Do not use a steam cleaner to clean the hob.

- Do not place or drop heavy objects on your hob.

- Do not stand on your hob.

- Do not use pans with jagged edges or drag pans

across the surface as this can scratch the glass.

- Do not use scourers or any other harsh abrasive

cleaning agents to clean your hob, as these can

scratch glass.

- If the supply cord is damaged, it must be replaced

by Caple service or similarly qualified persons in

order to avoid a hazard.

«
...
5
6
7
8
9
...
»

Summary of Contents for C856i





































Reviews:

No comments