manualshive.com logo in svg

Caple C856i, Instruction Manual, Page: 4 / 36

Share
Download
Caple C856i Instruction Manual Download Page 4

Instruction manual C856i

Please keep this instruction manual for future reference

4

 

-  In order to avoid a hazard, this appliance must be 

installed according to these instructions

 

-  This appliance is to be installed correctly and 

earthed only by a suitably qualified person.

 

-  This appliance should be connected to a circuit 

which incorporates an isolating switch providing 

full disconnection from the power supply.

 

-  Failure to install the appliance correctly could 

invalidate any warranty or liability claims.

OPERATION AND MAINTENANCE
ELECTRICAL SHOCK HAZARD

 

-  Do not cook on a broken or cracked hob. If the 

hob surface should break or crack, switch the 

appliance off immediately at the main power 

supply (wall switch) and contact a qualified 

technician.

 

-  Switch the hob off at the wall before cleaning or 

maintenance.

 

-  Failure to follow this advice could be fatal or 

seriously injure user.

HEALTH HAZARD

 

-  This appliance complies with electromagnetic 

safety standards.

 

-  Persons with cardiac pacemakers or other electrical 

implants must consult their doctor before using 

Summary of Contents for C856i





































Reviews:

No comments