Capitani DESIDERIO PLUS, Instruction Manual

Page: 36 / 104

Fig. 21
OPTIONAL ACCESSORIES
IRON (Fig. 20 - 21 - 22))
USING THE STEAM GENERATOR FOR
IRONING
To use the iron, install the iron connection (3) to the
accessory socket
(Fig. 20)
. Follow the same
procedure used for attaching the hose. Refer to
"Fitting the hose" on page 9
(Fig. 10) .
- Rotate the iron’s temperature selector knob (23) to
the desired temperature notch in order to adapt the
temperature of the iron sole plate to the type of fabric
you are going to iron.
(Fig. 21) .
- Wait about 3 min. for the iron plate to reach the
selected temperature.
- Proceed as per normal (as you would do with dry
ironing) and release steam when necessary by
pressing the button (22) on the handle.
NOTE
Steam ironing is particularly suitable for
removing shine spots from clothes and making
woollen garments, curtains, etc. come alive
again. Upright ironing is also possible.
IMPORTANT
Be extremely careful when ironing different
types of fabrics in the same ironing session.
It is advisable to gradually increase the
temperature in the SYNTHETICS/ SILK /
WOOL/ COTTON / LINEN sequence. This will
eliminate idle times.
At any rate, should you need to change from
high to low temperatures (silk, synthetics, etc.)
wait at least 8-10 minutes for the iron plate
to cool down, otherwise you run the risk of
damaging garments and soiling the plate.
34
Fig. 22
22
Fig. 20
2
3
23