CAPITAL SPORTS 10032745, Manual

Page: 44 / 184

44
EN
BEFORE ASSEMBLY
Importantv Notes
• Please use floor padding, such as cardboard, to avoid scratching your floor
during assembly.
• The nuts and bolts have a little grease on them to protect them from
corrosion. Please keep a rag handy to wipe your hands.
• Some plastic end caps and plugs have been assembled on the unit prior to
shipment. They are shown on the assembly drawings for reference in the
event replacement parts are needed.
• The BIKE uses several different lengths of bolts. Be carefully to use the
correct length of bolt called for at each step of assembly.
Before you begin
• Locate a comfortable work site. Assemble your BIKE in an open space
with adequate ventilation and lighting. Because the BIKE is portable to
some extent, you need not assemble it exactly where it is to be used. For
your convenience, however, you should avoid hauling the Bike across
excessive distance, through narrow passageways or over staircases once
its assembly is complete. If the BIKE is to be assembled in living quarters,
protect the floor or carpet with a large mat before removing parts from
carton.
• Review all safety guideline on page 2 of this manual.