www.cap-homey.com
User Manual
CAP-TECH INTERNATIONAL CO.,LTD.
Operating instructions
There are two sets of jumper in the alarm, respectively are the volume control jumper (plug in for
big volume) and tamper jumper (plug in to open warning). Plug in or remove the jumper can
switch between different function settings (Fig. 8 & 9).
Fig.8
Fig.9
Note:
Tamper is designed to start the alarm to notify users and deter vandals when alarm is
force forcibly removed. When the switch is pressed for more than 3 seconds later, tamper
function will start. If you switch off again at this time (it is equal to remove it from the wall
after installation), then an alarm is raised, and flash and the alarm will last for 3 minutes.
Safety Notice
Don't make the device directly to the window/fan/air-conditioner or sunlight.
Do not install the device above or facing any source of heat directly, such as fires, radiators,
