www.cap-homey.com
User Manual
CAP-TECH INTERNATIONAL CO.,LTD.
⑥
Link Key
⑦
DC power supply
Z-WAVE NETWORK INCLUSION
1)
Connect the power supply, and make sure that device in a state of "No node ID".
2)
Choose "Z-Wave" to enter the Network Inclusion mode on the APP, then click "finish".
3)
Pressing link key 3 times within 1.5 second.(The green LED lights up and sends out "beep"
sound when link key is pressed.)
4)
When prompt a message “Request Access Success”, please go to the device list interface, and
refresh the device list, the device will be displayed.
Z-WAVE NETWORK EXCLUSION
1)
Make sure the device is connected to the power supply.
2)
Remove the device on the APP, then click "finish".
3)
Pressing link key 3 times within 1.5 second (The green LED lights up and sends out "beep"
sound when link key is pressed.).
4)
Please go to the device list interface, and refresh the device list, the device will not be
displayed.
5)
If the device can still be displayed (network exclusion failed), repeat steps 2-4.
NOTE:
