50
Allow BW 40 MHz
Check this box to allow BW 40MHz capability.
Tx BURST
Check this box to accelerate the data transmit rate. It
may not work with all wireless access point and wireless
devices.
Beacon(ms)
You can define the time interval that a beacon signal
should be send. Default value is 100. Do not modify this
value unless you know what will be affected.
TX Power
You can select the wireless output power here. Please
select a proper output power setting according to your
actual needs. You may not need 100% of output power if
other wireless clients are not far from you.
Idle Time
Select the idle time for the wireless access point. Default
value is 300. Do not modify this value unless you know
what will be affected.
To save changes, click ‘Apply button. Or you can click ‘Default’ to reset all
values to factory default value.
Security Setting
This wireless card supports wireless encryption in AP mode, which will encrypt the
data being transferred over the air to enhance data security level. It’s recommended
to enable data encryption unless you wish to open your computer (and its internet
connection) to the public.
When you click ‘Security Setting’ in the utility, the following window will appear:
Summary of Contents for CNP-WF518N1
Page 1: ...CNP WF518N1 Wireless USB Adapter User Manual ...
Page 3: ...Appendix 57 Specification 57 Troubleshooting 57 Glossary 59 ...
Page 29: ...26 ...
Page 59: ...56 ...
